apiand.blogg.se

Mid 2010 1067 ram for mac
Mid 2010 1067 ram for mac






mid 2010 1067 ram for mac
  1. Mid 2010 1067 ram for mac for mac#
  2. Mid 2010 1067 ram for mac install#
  3. Mid 2010 1067 ram for mac pro#
  4. Mid 2010 1067 ram for mac mac#

when I installed Windows via Bootcamp, I found that Windows didnt.

mid 2010 1067 ram for mac

Mid 2010 1067 ram for mac mac#

I have the mac mini 1.1 with this configuration.Intel Core Duo 1.73 GHz.

Mid 2010 1067 ram for mac pro#

So look up the serials on the manufacturer or vendor website that lists the specs and go from there. Mac Pro (Mid 2010) Mac Pro (15-inch and 17-inch, 2.2 & 2.4GHz) Mac mini (Mid 2007) Mac mini (Early 2009 & Late 2009) Mac mini (Mid 2010). In this case, the 1333 Mhz speed is what is reported. Issue is not with higher speed memory which just defaults down to the lower speed that the BIOS supports.

Mid 2010 1067 ram for mac for mac#

Samsung, like Crucial, Elpida, Kingston, Corsair, etc all make good memory, but even the best memory will not work if it is does not support the correct voltage type. Timetec 16GB KIT (2x8GB) Compatible for Apple DDR3 1067MHz / 1066MHz PC3-8500 RAM for Mac Book (Mid 2010 13-inch), Mac Book Pro (Mid 2010 13-inch), iMac (Late 2009 27-inch), Mac Mini (Mid 2010) MAC RAM. So, some people will report Samsung as working, and others will say it does not. DDR3 1066/1067 MHz RAM for MacBook, MacBook Pro, iMac, Mac Mini (Late 2008, Early/Mid/Late 2009, Mid 2010) 204-Pin SODIMM Memory Kit at. Trick is to make sure the memory you get supports 1.5V as most of the newer memory is lower voltage (eg., 1.35V or 1.2V) that is NOT SUPPORTED by the iMacs older than 2013. Memory under "About this Mac" is reported as "32GB of 1333 Mhz DDR3." Therefore, not reported as its native 1600 Mhz.

Mid 2010 1067 ram for mac install#

Was able to install four (4) mixed serial 8GB SO-DIMMs of Samsung PC3-12800 (1600Mhz) DDR3 SDRAM memory modules (Samsung Memory sticker IDs listed as M471B1G73DB0-YK0 1338 and M471B1G73CB0-CK0 1251) in a Mid-2010 27" iMac with an Intel 2.93Ghz i7-870 processor.

  • "PC3-12800" is the name used in the memory industry - 12800 indicates a peak transfer rate of 12800 MB/s (of course, the actual performance in your case would be brought down to 8533 MB/s, matching PC3-8500).
  • "1600" is the data transfer rate per second specified in millions (the technical term is "clock frequency") - "1600" here means it supports up to 1600 million transfers per second - in your case, it will be slowed down to 1066 million transfers per second since that's what your Mac is designed for.
  • "DDR3" is the type (and must be the same as what your computer has).
  • mid 2010 1067 ram for mac

    However, your system will operate at the speed of the slowest memory module. Memory is designed to be backward-compatible, so generally speaking, you can safely add faster memory to a computer that was designed to run slower memory. A-Tech 16GB Kit (2x8GB) DDR3 1066MHz / 1067MHz PC3-8500 SODIMM RAM for Apple MacBook (13 inch, Mid 2010), MacBook Pro (13 inch, Mid 2010), iMac (27 inch, Late. Here's some relevant information from Crucial on memory speeds (emphasis mine): A-Tech 8GB (2 x 4GB) PC3-8500 DDR3 1066/1067 MHz RAM for MacBook, MacBook Pro, iMac, Mac Mini (Late 2008, Early/Mid/Late 2009, Mid 2010) 204-Pin SODIMM. Supposing it might be that one of the new sticks was bad, I tried every permutation of old with new and both 8GB sticks are good.You could add the 1600 MHz memory for your MacBook Pro even though it's designed for a slower memory (1066 MHz) - it ought to work, but you'd be better off buying from a place that accepts returns. Boots, starts, shows 10GB RAM (8 and 2) in the profiler. So I tried it with one of the new 8GB sticks and one of the old 2GB sticks and that works. The sleep light on the front stays on (no blinking) but nothing happens after several minutes. I installed both sticks in both slots and booted up, but the screen stays black and no chime. I had 4GB of RAM (2x2GB) and I read somewhere that despite Apple's stated max of 8GB RAM (2x4GB) it will actually support 16GB (2x8GB) of RAM. I have a mid 2010 13in MacBook Pro (7,1) with a 2.4GHz Intel Core 2 Duo processor running OS X 10.11.3 (El Capitan).








    Mid 2010 1067 ram for mac